Car Brite Purple Dressing - Gallon

DO NOT apply to engines, or brake/accelerator pedals.

Car Brite Purple Dressing will make applying a dressing to your rubber, vinyl, and plastic easier than ever before. The simple spray and wipe application process of Purple Dressing will certainly reduce the time commitment of your detailing routine. Purple Dressing brings a deep and rich shine to the rubber, plastic, and vinyl surfaces of your vehicle that is sure to last. The formula is solvent-based, which allows the shining agents to penetrate the surface more effectively, increasing the durability and lifetime of the gloss provided by this product. Purple Dressing will counter-act the fading and moisture depletion commonly caused by heavy exposure to harmful UV rays by restoring the moisture back to your vehicle’s rubber, plastic, and vinyl surfaces.

Primary Uses:

• Restoring and enhancing the appearance of tires, exterior rubber moldings, trim, and vinyl
• Providing a long-lasting, high-gloss shine on exterior and interior surfaces
• Protecting surfaces against UV rays and environmental contaminants

Alternate Uses:

• Applying to exterior surfaces on boats, RVs, motorcycles, and other transportation vehicles

Car Brite Purple Dressing is preferred by automotive professionals due to the following reasons:

• Versatile, all-in-one solution for both exterior and interior surfaces
• Water-based, non-greasy formula for easy application and a high-gloss finish
• Long-lasting protection against UV rays and environmental contaminants
• Suitable for a wide range of materials, ensuring consistent results across surfaces

Product Longevity:

• Car Brite Purple Dressing provides long-lasting protection and shine for your vehicle's exterior and interior surfaces. Depending on usage, environmental factors, and proper maintenance, the product's effects can last for several weeks to months.

Directions for Use:

1. Ensure the vehicle is parked in a shaded, well-ventilated area and the surfaces to be treated are clean, dry, and cool to the touch.
2. Shake the Car Brite Purple Dressing bottle well before use.
3. If necessary, dilute the product according to the desired level of shine (refer to dilution ratios below).
4. Apply the product to a clean, lint-free microfiber cloth or applicator pad.
5. Gently work the product into the surface, using a circular motion for tires and a side-to-side motion for other surfaces.
6. Allow the product to penetrate the surface for a few moments, then wipe away any excess with a clean, dry microfiber cloth.
7. For a higher level of shine, apply additional coats as desired, allowing each coat to dry before applying the next.

Finish and Residues:

Car Brite Purple Dressing leaves a high-gloss finish that enhances the appearance of treated surfaces..

Best Practices:

• Be sure to let your tires dry at least 10 minutes before driving. This will help to avoid product “slinging” onto body panels
• For the “wet look”, apply Purple Dressing directly onto the surface with a mist sprayer
• For a less shiny look, apply, then use a sponge applicator and wipe until uniform

Safety Information:

• Test the product on an inconspicuous area before applying it to the entire surface.
• Use separate cloths or applicator pads for different surfaces to avoid cross-contamination.
• Regularly clean and replace microfiber cloths and applicator pads to maintain their effectiveness.

Dilution Ratios:

• High gloss: Ready to Use

SCENT: Grape

Safety Information:

• Always read and follow the label instructions and safety information.
• Keep out of reach of children and pets.
• Wear appropriate personal protective equipment (gloves, eye protection) during application.
• Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water and seek medical advice if necessary.