When you need substantial small parts and tool organization in your truck bed or cargo van with optimal weight efficiency, the WEATHER GUARD ITEMIZER Stacked Van Drawer Unit (Model 327-3) delivers professional-grade performance with lightweight aluminum construction in a bright white finish. This innovative automotive accessory features three stacked drawers, each with 75-pound capacity and adjustable dividers for extensive organization options, creating a versatile vehicle storage solution that places small equipment, parts, and tools at your fingertips. Measuring 49" long, 12.25" wide, and 17.75" high, this enclosed unit provides balanced vertical storage capacity while consuming minimal floor space—ideal for organizing inventory, small tools, fasteners, electrical components, plumbing supplies, or any operation requiring systematic access to numerous small items. At just 71 pounds, the aluminum construction delivers three full drawers with 250-pound top load capacity while weighing significantly less than comparable steel units. For contractors, service technicians, fleet managers, or anyone needing extensive small parts organization without excessive weight or height, this represents an intelligent durable truck bed cover alternative that optimizes storage density through vertical stacking.
Lightweight Aluminum Construction for Maximum Efficiency
The ITEMIZER Drawer Unit is constructed of lightweight aluminum—a strategic material choice for applications where weight management is critical. At just 71 pounds for a three-drawer stacked unit, the aluminum construction provides extensive storage capacity while weighing dramatically less than equivalent steel units. This weight efficiency is valuable for maintaining maximum payload capacity for tools, materials, and equipment, improving fuel economy by minimizing vehicle weight, making installation more manageable (potentially by one person), and allowing multiple units to be installed without excessive weight penalty.
Aluminum offers natural corrosion resistance for long-term durability even when exposed to moisture, humidity, or varying environmental conditions inside vehicles. The bright white ARMOR TUF powder coat finish over aluminum provides additional protection against scratches and UV exposure while creating the clean, professional appearance that commercial operations value. White maintains professional image, reflects light for better visibility when accessing contents, communicates organization and cleanliness, and coordinates with commercial vehicles and van interiors.
The 250-pound top load capacity allows the unit to function as more than just drawer storage—the top surface can support additional storage units (ITEMIZER units can be stacked as needed for additional storage), toolboxes, equipment cases, or materials. Anti-skid strips provide traction for work boots on top, important when stepping on or accessing items stored above the unit.
Three Stacked Drawers with Adjustable Organization
The triple stacked drawer configuration creates excellent storage density in a compact footprint while maintaining a lower profile than the four-drawer model. Three full-extension drawers measuring 49" long provide organized access to extensive inventories of small parts, tools, and equipment without consuming excessive floor space or creating excessive height. Each drawer carries up to 75 pounds of equipment or parts—adequate capacity for most small parts and tool applications while keeping individual drawer weights manageable for frequent access throughout the workday.
Roller-mounted drawers glide open to full extension, bringing the entire drawer contents forward for complete visibility and easy access to items even at the back. Full extension is critical for long 49" drawers where items stored at the rear would otherwise be difficult to reach without removing forward items. The smooth roller operation ensures drawers open easily even when fully loaded, don't bind or stick during operation, provide quiet operation, and deliver reliable long-term performance through thousands of opening and closing cycles.
Each drawer compartment measures 4.25" high, 10.5" wide, and 46.5" long. The 4.25" height is optimized for small parts, hand tools, testing equipment, electrical components, fasteners, small power tool accessories, and similar items that require organized compartmentalization. Adjustable drawer dividers offer flexible organization—configure each drawer based on your specific inventory, create compartments for different part types or sizes, reorganize as inventory or job requirements change, or customize organization for different trades or applications. This adjustability ensures the unit adapts to your evolving needs rather than forcing you to work around fixed compartments.
Each drawer includes its own latch for independent secure closure. The lock mount is provided for installation of optional camlock—allowing you to add keyed locks if security is required for valuable tools or parts (locks installed by user). The three separate latches mean you can access one drawer without opening others, maintaining organization in unopened drawers and preventing contents from shifting during vehicle movement.
Key Features
- Three Stacked Drawers: Triple drawer configuration balances storage density with manageable height—4.25" drawers ideal for small parts
- Lightweight 71 lb Aluminum Construction: Extremely light while providing three 75 lb capacity drawers and 250 lb top rating
- Full-Extension Roller-Mounted Drawers: Smooth operation with complete access to 49" drawer depth—no difficult-to-reach areas
- Adjustable Dividers in Each Drawer: Flexible organization customizes to your inventory and adapts as needs change
Balanced Footprint and Height for Versatile Applications
The floor mounting location combined with the 49" x 12.25" footprint and 17.75" height creates excellent storage density while maintaining a lower profile than taller stacked units. The narrow 12.25" width consumes minimal floor space while the 17.75" height provides substantial vertical storage without excessive height that could interfere with overhead clearance, prevent stacking of items on top, or create access challenges. This balanced vertical design is ideal for cargo vans where floor space is premium but interior height allows vertical storage, truck beds under caps or tonneau covers where height may be limited, service body installations where supplemental drawer storage fits between compartments, mobile workshops requiring systematic tool and parts access, or any application where organizing numerous small items efficiently matters without creating excessive overall height.
The 49" length fits crosswise in most truck beds or positions along cargo van sides. The 12.25" width leaves substantial floor space available beside the unit—in a standard full-size truck bed, this would leave approximately 40-50" of bed width open for materials, equipment, or additional storage. Multiple ITEMIZER units can be stacked vertically for additional storage without increasing floor space consumption, creating modular storage systems tailored to specific operational needs and space constraints.
The enclosed design protects contents from dust, debris, and weather exposure—important for small parts and tools that could be damaged, corroded, or lost in open storage. The drawer design prevents items from shifting during transit even on rough roads, maintains organization through constant vehicle movement, and ensures quick location of needed items without searching through open bins or mixed containers.
Installation takes approximately 0.8 hours (about 48 minutes) and involves securing the 71-pound unit to the truck bed or van floor. The manageable weight makes this one of the lighter professional storage units to install, potentially achievable by one person in many situations.
Quality and Professional Applications
The Limited Lifetime Warranty demonstrates WEATHER GUARD's confidence in aluminum construction quality for professional daily use with frequent drawer operation. USA manufacturing ensures quality control standards, welding procedures, material specifications, and construction methods meet requirements for commercial vehicle storage solutions that experience constant access throughout workdays.
The ITEMIZER system is specifically designed for indoor vehicle applications—truck bed storage under caps or tonneau covers, enclosed cargo van storage, or service body installations. The aluminum construction and enclosed design are ideal for protected environments where extensive small parts organization is required without the weight of steel construction.
Product Specifications
Model Number: 327-3
Style: ITEMIZER Stacked Van Drawer Unit (3 Drawers)
Material: Aluminum
Finish: Brite White ARMOR TUF Powder Coat
Configuration: 3 Stacked Drawers, 1 Compartment Per Drawer
Drawer Load Capacity: 75 lbs each (evenly distributed)
Top Load Capacity: 250 lbs (evenly distributed)
Mounting Location: Van Floor / Truck Bed Floor
Latch System: 3 Individual Drawer Latches
Lock: User-Installed (lock mount provided for optional camlock)
Installation Time: 0.8 hours
Warranty: Limited Lifetime
Country of Origin: USA
Dimensions:
- Length: 49"
- Width: 12.25"
- Height: 17.75"
- Weight: 71 lbs
- Shipping Length: 39.25"
Drawer Dimensions (Each):
- Height: 4.25"
- Width: 10.5"
- Length: 46.5"
- Quantity: 3 drawers
Key Features:
- 3 stacked drawers
- 75 lb capacity per drawer
- 250 lb top load capacity
- Full-extension roller-mounted drawers
- Adjustable dividers in each drawer
- Lightweight aluminum (71 lbs)
- Anti-skid top surface
- Enclosed design
- Individual drawer latches
- User-installed lock capability
- Bright white powder coat finish
- USA manufacturing
- Stackable design
- Compact 49" x 12.25" footprint
- Balanced 17.75" height
Applications:
- Cargo van small parts storage
- Truck bed organization (under cap/cover)
- Service body supplemental storage
- Mobile workshop applications
- Electrical/plumbing parts inventory
- Fastener and hardware organization
- Tool and equipment storage
- Applications requiring lower profile than 4-drawer units
- Indoor vehicle storage applications
Balanced Small Parts Organization in Lightweight Aluminum
Whether you're an electrician organizing components and testing equipment without excessive height, a plumber managing fittings and supplies in efficient vertical storage, a general contractor systematizing fasteners and small tools with optimal weight efficiency, a service technician requiring organized access to parts without four-drawer height, a maintenance professional managing inventory across multiple property types, a fleet manager standardizing lightweight storage with balanced dimensions across vans, or anyone needing extensive small parts organization without steel's weight or excessive vertical space consumption, the WEATHER GUARD ITEMIZER Triple Stacked Van Drawer Unit delivers the optimized professional solution. The combination of three stacked drawers providing excellent storage density in balanced height, 75-pound capacity per drawer with adjustable dividers, full-extension roller operation for complete access, lightweight 71-pound aluminum construction, compact 12.25" width preserving floor space, enclosed design protecting contents, 250-pound top load rating, stackable design for modular expansion, balanced 17.75" height, bright white professional finish, and USA manufacturing with Limited Lifetime Warranty makes this the intelligent choice for systematic small parts management where weight and height both matter. This isn't just drawer storage—it's a carefully optimized organizational system that balances storage capacity, weight efficiency, and practical height to transform how you manage the numerous small items that define professional operations.
Terms to Know
- Full-Extension Drawers: Drawers that slide out completely, providing access to the entire drawer depth including items at the very back—essential for 49" drawer length.
- Roller-Mounted Drawers: Drawers that operate on roller mechanisms for smooth, easy opening even when fully loaded—more durable than simple slide mechanisms.
- Adjustable Dividers: Removable or repositionable partitions allowing customized organization that adapts to changing inventory needs and different applications.
- Enclosed Storage: Fully enclosed design protecting contents from dust, debris, and weather exposure—maintains organization and prevents loss during transit.
- Load Capacity Per Drawer: The maximum weight each individual drawer can safely support—75 lbs is optimized for small parts, tools, and equipment.
- Storage Density: The amount of organized storage capacity achieved in a given floor space—vertical stacking maximizes density while minimizing footprint.
- Stackable Design: Configuration allowing multiple units to be stacked vertically for modular storage expansion without consuming additional floor space.
- Camlock: A type of lock with a rotating cam mechanism—user can install optional camlocks in provided lock mounts for security if needed.
- ARMOR TUF Powder Coat: Durable finishing process creating tough, chip-resistant, corrosion-proof protection for aluminum equipment.
- Indoor Vehicle Application: Designed for protected environments like cargo van interiors or covered truck beds rather than direct outdoor exposure.
