When you need substantial small parts and tool organization in your truck bed or cargo van with absolute minimal height and balanced footprint, the WEATHER GUARD ITEMIZER Van Drawer Unit (Model 317-3) delivers professional-grade performance with lightweight aluminum construction in a triple lateral drawer configuration and bright white finish. This innovative automotive accessory features three lateral drawers arranged side-by-side, each with 75-pound capacity and adjustable dividers for extensive organization, creating a versatile vehicle storage solution that places small equipment, parts, and tools at your fingertips. Measuring 49" long, 36" wide, and just 6.75" high, this enclosed unit provides exceptional storage capacity in an ultra-low-profile design with more manageable width than the four-drawer model—ideal for organizing inventory, small tools, fasteners, electrical components, plumbing supplies, or any operation requiring systematic access to numerous small items without consuming vertical space. At just 82 pounds, the aluminum construction delivers three full drawers with 250-pound top load capacity in a profile so low it can fit under benches, beneath raised floors, or in applications where height clearance is measured in inches. For contractors, service technicians, fleet managers, or anyone needing comprehensive small parts organization with absolute minimum height impact and practical width, this represents an intelligent durable truck bed cover alternative that balances horizontal storage density with installation versatility.
Lightweight Aluminum Construction in Ultra-Low Profile
The ITEMIZER Drawer Unit is constructed of lightweight aluminum—a strategic material choice for applications where weight management matters. At just 82 pounds for a three-drawer lateral unit with substantial 49" x 36" footprint, the aluminum construction provides extensive storage capacity while weighing significantly less than equivalent steel units. This weight efficiency is valuable for maintaining payload capacity for revenue-generating tools, materials, and equipment, improving fuel economy by minimizing vehicle weight, making installation more manageable with two-person or even careful one-person handling, allowing the unit to be positioned without floor reinforcement concerns, and preserving vehicle suspension and tire life.
Aluminum offers natural corrosion resistance for long-term durability even when exposed to moisture, humidity, or varying environmental conditions inside vehicles. The bright white ARMOR TUF powder coat finish over aluminum provides additional protection against scratches and UV exposure while creating the clean, professional appearance that commercial operations value. White maintains professional image, reflects light for superior visibility when accessing contents, communicates organization and attention to detail, and coordinates perfectly with commercial vehicles and van interiors.
The 250-pound top load capacity—remarkable for such a low-profile unit—transforms the 49" x 36" surface into valuable usable space. The top can support additional storage units (ITEMIZER units can be stacked as needed), toolboxes, equipment cases, materials, or even create a work surface or platform when positioned appropriately. Anti-skid strips provide traction for work boots on top, important when stepping on or accessing the surface to reach other areas or items stored above.
Three Lateral Drawers with Adjustable Organization
The triple lateral drawer configuration provides excellent storage capacity in minimal height while offering more practical width than the four-drawer model. Three full-extension drawers arranged side-by-side across the 36" width, each extending along the 49" length, create substantial organized storage without requiring the full 48" width of the quad drawer unit. This makes the triple drawer configuration ideal for applications where the 36" width better fits available floor space, leaves room alongside for other storage or equipment, fits within vehicle width constraints, or simply provides the right balance of capacity and footprint for specific operational needs.
Each drawer carries up to 75 pounds of equipment or parts—adequate capacity for most small parts and tool applications while keeping individual drawer weights very manageable for constant access throughout busy workdays. Roller-mounted drawers glide open to full extension, bringing the entire drawer contents forward for complete visibility and easy access to items even at the very back. Full extension is critical for 49" drawer length where items stored at the rear would be completely inaccessible without this feature. The smooth roller operation ensures drawers open easily even when fully loaded, operate without binding or interference between adjacent drawers, and provide reliable long-term performance.
Each drawer compartment measures 4.25" high, 10.5" wide, and 46.5" long. The 4.25" height is optimized for small parts, hand tools, testing equipment, electrical components, fasteners, small power tool accessories, measuring instruments, safety equipment, and similar items requiring organized compartmentalization. Adjustable drawer dividers offer flexible organization—configure each of the three drawers independently based on specific inventory categories, create specialized organization for different trades or job types in separate drawers, dedicate drawers to different team members or project types, reorganize as inventory evolves, or customize each drawer for different operational phases. This adjustability across three independent drawers provides excellent organizational versatility.
Each drawer includes its own latch for independent secure closure. The lock mount is provided for installation of optional camlock—allowing you to add keyed locks if security is required for valuable tools or parts (locks installed by user). The three separate latches mean you can access any single drawer without opening others, maintaining organization in unopened drawers and preventing contents from shifting.
Key Features
- Ultra-Low 6.75" Profile: Three full drawers in minimal height—fits under benches, beneath raised floors, or in extreme height constraints
- Balanced 36" Width: Three side-by-side drawers in practical width—more versatile placement than 48" quad models
- Triple Lateral Drawer Configuration: Three independent 75 lb capacity drawers across width—comprehensive organization in low-profile design
- Lightweight 82 lb Aluminum: Professional three-drawer capacity without steel's weight—manageable installation and minimal vehicle impact
Balanced Capacity and Practical Dimensions
The floor mounting location combined with the balanced 49" x 36" footprint and ultra-low 6.75" height creates a versatile solution for applications where height is critical but the full 48" width of the quad drawer unit isn't necessary or practical. The 36" width provides three separate organized drawers while leaving more floor space available alongside the unit compared to the wider four-drawer model. This lateral design is ideal for under-bench installations in van conversions where the 36" width better fits available space, beneath raised floor platforms in custom buildouts, between floor and equipment in cargo vans, in service bodies where the narrower width leaves room for other systems, applications where drawer organization is needed alongside other floor-mounted storage, installations requiring organized storage that doesn't span full vehicle width, or any application where comprehensive drawer organization is needed in minimal height with practical width considerations.
The 49" x 36" footprint (approximately 4' x 3') is substantial enough to provide meaningful storage capacity across three drawers while being more versatile in placement than the full 48" width quad drawer model. In cargo vans, this can create organized storage along one side while leaving the other side more open. In truck beds with caps, this can fit within custom layouts without dominating all available floor space.
The enclosed design protects contents from dust, debris, and weather exposure—important for small parts and tools that could be damaged or lost. The drawer design prevents items from shifting during transit, maintains organization through vehicle movement, and ensures quick location of needed items across the three organized drawers.
Installation takes approximately 0.8 hours (about 48 minutes) and involves securing the 82-pound unit to the truck bed or van floor. Two-person installation is recommended for proper positioning, though the manageable 82-pound weight makes this one of the more straightforward professional storage installations.
Quality and Specialized Applications
The Limited Lifetime Warranty demonstrates WEATHER GUARD's confidence in aluminum construction quality for professional daily use with frequent multi-drawer access. USA manufacturing ensures quality control standards, welding procedures, material specifications, and construction methods meet requirements for commercial vehicle storage solutions operating in demanding environments where drawers are accessed dozens of times daily.
The ITEMIZER system is specifically designed for indoor vehicle applications—truck bed storage under caps, enclosed cargo van storage, or service body installations. The aluminum construction and enclosed design are ideal for protected environments where extensive small parts organization is required in absolute minimum height with practical width considerations.
Product Specifications
Model Number: 317-3
Style: ITEMIZER Van Drawer Unit (3 Lateral Drawers)
Material: Aluminum
Finish: Brite White ARMOR TUF Powder Coat
Configuration: 3 Lateral Drawers (Side-by-Side), 1 Compartment Per Drawer
Drawer Load Capacity: 75 lbs each (evenly distributed)
Top Load Capacity: 250 lbs (evenly distributed)
Mounting Location: Van Floor / Truck Bed Floor
Latch System: 3 Individual Drawer Latches
Lock: User-Installed (lock mount provided for optional camlock)
Installation Time: 0.8 hours
Warranty: Limited Lifetime
Country of Origin: USA
Dimensions:
- Length: 49"
- Width: 36"
- Height: 6.75"
- Weight: 82 lbs
Drawer Dimensions (Each):
- Height: 4.25"
- Width: 10.5"
- Length: 46.5"
- Quantity: 3 drawers (lateral arrangement)
Key Features:
- 3 lateral drawers (side-by-side)
- 75 lb capacity per drawer
- 250 lb top load capacity
- Full-extension roller-mounted drawers
- Adjustable dividers in each drawer
- Lightweight aluminum (82 lbs)
- Anti-skid top surface
- Enclosed design
- Individual drawer latches
- User-installed lock capability
- Bright white powder coat finish
- USA manufacturing
- Stackable design
- Balanced 49" x 36" footprint
- Ultra-low 6.75" profile
Applications:
- Under-bench van conversion storage
- Beneath raised floor platforms
- Custom mobile workshop buildouts
- Height-constrained service body installations
- Alongside other floor-mounted storage systems
- Van conversions with side-by-side storage needs
- Applications requiring balanced width
- Installations beneath work surfaces
- Indoor vehicle storage applications
- Professional van conversions with space constraints
Balanced Organization in Minimum Height
Whether you're building a custom van conversion requiring under-bench storage with practical width, installing organized storage beneath raised platforms where 48" is too wide, creating a mobile workshop where height clearance is critical and floor space must accommodate multiple systems, organizing a service body with existing equipment requiring space alongside drawer storage, managing small parts inventories in height-constrained spaces with balanced footprint, standardizing storage in fleet vehicles with custom interiors where the 36" width optimizes layout, or needing three-drawer organization where vertical space is measured in inches and full-width isn't necessary, the WEATHER GUARD ITEMIZER Triple Lateral Van Drawer Unit delivers the versatile professional solution. The combination of three lateral drawers in ultra-low 6.75" height, 75-pound capacity per drawer with adjustable dividers, full-extension roller operation across 49" length, balanced 49" x 36" footprint providing practical dimensions, lightweight 82-pound aluminum construction, enclosed design protecting contents, remarkable 250-pound top load rating, stackable design for modular systems, bright white professional finish, and USA manufacturing with Limited Lifetime Warranty makes this the intelligent choice when height constraints demand lateral storage with practical width considerations. This isn't just low-profile drawer storage—it's the balanced solution that provides comprehensive three-drawer organization in spaces where conventional wisdom says extensive storage can't fit, delivering independent organized drawers in a profile lower than most single-drawer units with dimensions that optimize real-world vehicle layouts.
Terms to Know
- ITEMIZER: WEATHER GUARD's lightweight aluminum drawer system designed specifically for small parts and tool organization in vehicles—emphasizes weight efficiency and innovative low-profile configurations.
- Triple Lateral Drawer Configuration: Three drawers arranged side-by-side horizontally rather than stacked vertically—balances storage capacity with practical width in minimal height.
- Ultra-Low Profile: Extreme minimal height design (6.75")—fits in spaces where conventional stacked drawer units cannot, such as under benches or beneath platforms.
- Balanced Footprint: The 49" x 36" dimensions provide substantial three-drawer capacity without the full 48" width of quad models—more versatile placement options.
- Lateral Drawer Arrangement: Drawers positioned horizontally across width rather than vertically stacked—maximizes storage in height-constrained applications.
- Full-Extension Drawers: Drawers that slide out completely, providing access to the entire 49" drawer depth including items at the very back.
- Roller-Mounted Drawers: Drawers that operate on roller mechanisms for smooth opening even when fully loaded—critical for lateral arrangement where drawers are adjacent.
- Adjustable Dividers: Removable or repositionable partitions allowing customized organization in each of the three drawers independently.
- Aluminum Construction: Lightweight alloy materials providing professional three-drawer capability at 82 lbs—significantly lighter than steel alternatives.
- Enclosed Storage: Fully enclosed design protecting contents from dust, debris, and weather exposure—maintains organization in low-profile installation.
- Load Capacity Per Drawer: The maximum weight each individual drawer can safely support—75 lbs per drawer optimized for small parts and tools.
- Stackable Design: Configuration allowing ITEMIZER units to be stacked above this low-profile base—creates modular storage systems.
- Camlock: A type of lock with rotating cam mechanism—user can install optional camlocks in provided lock mounts for security.
- ARMOR TUF Powder Coat: Durable finishing process creating tough, chip-resistant, corrosion-proof protection for aluminum equipment.
- Under-Bench Installation: Mounting beneath work surfaces, seating, or platforms—takes advantage of otherwise unused low-clearance space.
- Practical Width: The 36" width provides three-drawer capacity while leaving more floor space available than 48" quad drawer models—better for layouts requiring space alongside storage.
